To Next Page

To Previous Page

DSC Power Series PC1616 PC1832 PC1864 System Manual

https://alpha.adt.com/help/61[11/12/2018 9:40:17 PM]

2. Using the [< >] keys, scroll through the available languages.

3. Press [*] to select your desired language.

Time & Date Programming

Press [*][6], plus your Master Access Code or press the time programming function key (programmed by

your installer).

Press [1] to select Time and Date.

When using the PK5500/LCD5500, use the [< >] scroll keys to find the menu option and press [*] to

select.

Enter the time in 24-hr format (HH:MM), followed by the date (MM:DD:YY). Press [#] to exit programming.

Note: If you have an LCD keypad, your installer may have programmed your system to display the time

and date while the keypad is idle. If this is the case, you can press the [#] key to clear the date and time

display.

Alarm Memory

When an alarm occurs, the Memory or System indicator (and Fire indicator, if applicable) will turn on.

To view which sensor(s) generated the alarm, press [*][3]. The Memory or System indicator and

corresponding sensor number will flash (i.e., sensor 3).

For the PK5500/LCD5500 keypad use the [< >] scroll keys to view the sensors in alarm memory.

Press [#] to exit. To clear the memory, arm and disarm the system.

If an alarm sounded while armed, the keypad will automatically go to alarm memory when you disarm the

system. In this instance, you should approach with caution, as the intruder may still be within the

building/premises.

Changing Brightness/Contrast

PK5500/LCD5500

When this option is selected, the keypad will allow you to scroll through 10 different brightness/contrast

levels.

1. Press [*][6][Master code].

2. Use the [< >] keys to scroll to either Brightness Control or Contrast Control.

3. Press [*] to select the setting you want to adjust.

4. ‘Brightness Control’: There are multiple backlighting levels. Use the [< >] keys to scroll to the

DSC Power Series User Manual

Other manuals for DSC Power Series