[664] Integration Toggle Options 3
[1] UDP Polling (OFF)
[2] TCP Polling (OFF)
[3] Real-time Notification (OFF)
[4] Notification Follows Pool (OFF)
[5] Reserved
[6] Reserved
[7] Reserved
[8] Reserved
[665] Integrated Poll Interval in Seconds
Default (000A) Valid range: 0000 - FFFF.
[693] Integration Server IP
Default (000.000.000.000)
[694] Integration Notification Port
Default (0C00/0372) Valid range: 0000 - FFFF.
[695] Integration Polling Port
Default (0C01/3076) Valid range: 0000 - FFFF.
[697] Integration Server DNS
Default ( )
____________________________________
[698] Integration Outgoing Port
Default (0C04/3076) Valid range: 0000 - FFFF.
[699] Integration Incoming Port
Default (0BFF/3071) Valid range: 0000 - FFFF.
[711] Integration No-Activity Timeout
Default (0078) Valid range: 0000 - FFFF.
Receiver Diagnostic Testing
[901] Diagnostic Test Transmission
[1] Ethernet 1 Default (OFF).
[2] Ethernet 2 Default (OFF).
System Information (Read Only)
[983] Firmware Update Diagnostics Section
[984] Communicator Status
[987] Language Version
[988] DNS 1 IP Address
[989] DNS 2 IP Address
[990] Boot Loader Version
[991] Firmware Version
[992] Ethernet IP Address
[993] Ethernet Gateway Address
[998] MAC Address
System Reset Defaults
[999] Software Default
Default (99); Valid entries are 00 or 55
DigitalSecurityControlswarrantsthe originalpurchaser that for a period of twelve
months fromthe date of purchase, the product shallbe free of defectsin mater-
ialsand workmanship under normaluse. During the warrantyperiod, Digital
SecurityControlsshall, at itsoption, repair orreplace anydefective product upon
return of the productto itsfactory, at no charge forlabour and materials. Any
replacement and/or repaired partsare warranted for the remainder of the ori-
ginalwarranty orninety(90) days,whichever islonger. The originalpurchaser
must promptlynotifyDigitalSecurityControlsin writing that there isdefect in mater-
ialor workmanship, such written notice to be received in alleventspriorto expir-
ation of the warrantyperiod. There isabsolutelyno warrantyon software and all
software productsare sold asa userlicense under the termsof the software
license agreement included with the product. The Customerassumesallrespons-
ibilityforthe proper selection, installation, operation and maintenance of any
productspurchased fromDSC. Customproductsare onlywarranted to the
extent that theydo not function upon delivery.In such cases, DSCcan replace or
creditat itsoption.
International Warranty
The warrantyfor internationalcustomersisthe same asfor any customer within
Canada and the United States, with the exception that DigitalSecurityControls
shallnot be responsible for anycustomsfees, taxes, or VAT that maybe due.
Warranty Procedure
To obtain service under this warranty, please return the item(s)in question to the
point of purchase. Allauthorized distributorsand dealershave a warrantypro-
gram.Anyone returning goodsto DigitalSecurityControlsmust firstobtain an
authorization number. DigitalSecurityControlswillnot accept anyshipment what-
soeverfor which priorauthorization hasnot been obtained.
Conditions to Void Warranty
Thiswarrantyappliesonlyto defectsin partsand workmanship relating to normal
use. It doesnot cover:
l damage incurred in shipping or handling;
l damage caused bydisaster such asfire, flood, wind, earthquake orlight-
ning;
l damage due to causesbeyond the controlofDigitalSecurityControlssuch
asexcessive voltage, mechanicalshockorwater damage;
l damage caused byunauthorized attachment, alterations, modificationsor
foreign objects;
l damage caused byperipherals(unlesssuch peripheralswere supplied by
DigitalSecurityControls);
l defectscaused byfailure to provide a suitable installation environment for
the products;
l damage caused byuse of the productsforpurposesotherthan those for
which itwasdesigned;
l damage fromimpropermaintenance;
l damage arising out of anyotherabuse, mishandling or improperapplication
of the products.
Warranty
13
To Next Page
Loading...
