To Next Page
C
carpenteramandaAug 11, 2025
How to fix DHCP MAC filtering enabled on DSC Home Automation?
- SSarah HughesAug 11, 2025
To resolve this issue, the router must be programmed with the DSC iotega’s MAC address.
How to fix DHCP MAC filtering enabled on DSC Home Automation?
To resolve this issue, the router must be programmed with the DSC iotega’s MAC address.
How to fix DHCP outbound port filtering on DSC WS900-19UL?
The router must have the required ports enabled for outbound traffic.
How to fix DHCP with fixed IP address on DSC Home Automation?
The router must be programmed with the DSC iotega’s MAC address.
What to do if DSC WS900-19UL has a static IP on unit but no DHCP - Ethernet/Wi-Fi only?
The DSC iotega must be temporarily connected to a network with DHCP enabled.
General| Wireless Frequency | 433 MHz |
|---|---|
| Supervision | Yes |
| Tamper Protection | Yes |
| Power Supply | Battery Operated |
| Operating Temperature | -10°C to 55°C (14°F to 131°F) |
| Frequency | 433 MHz |
| Compatibility | PowerSeries NEO, PowerSeries PRO |
| Battery Type | 3V Lithium CR123A |