DSE 333 - Scheduler Setting; 10 Check List for Automatic Operation; 11 Warranty

Issue 1 10
9.4 SCHEDULER SETTINGdi
spay
Enter the editor as described above and press the button to access
the Scheduler page.
Press to enter edit mode and use the + / i buttons to make the
Schedule function active.
Press to save your change.
Press + to move to the next item.
Review the current setting and choose if the Scheduler is to perform an
‘on load’ test (active) or ‘off load’ test (inactive)
Press + to move to the next item.
Review the current setting and choose if the Scheduler is to perform a
weekly schedule (repeats every 7 days) or monthly (repeats every 28
days)
Press + to move to the next item.
Press to select which schedule entry to edit (there are up to 16
entries indicated by the number in the tope left corner)
Press to edit the schedule. The item being edited flashes.
Press + / - to change the flashing item.
Press to move to the next editable value. (On, Day, Run Time etc)
Press to save your change
ues
10 CHECK LIST FOR AUTOMATIC OPERATION
1. Auto mode selected on DSE333.
2. Generator output MCB & RCD in on position.
3. Generator in auto mode.
3. Battery charger switched on.
11 WARRANTY
All equipment supplied by STEPHILL GENERATORS LTD carries a warranty
of 12 months from date of despatch.
During the warranty period, should the plant fail due to faulty design, materials or workmanship by
STEPHILL or its sub-contractors, we undertake to rectify the fault by replacement or repair at our
option.
STEPHILL will accept no responsibility whatsoever for equipment that has failed due to;
- Improper repair or use of parts not supplied by STEPHILL.
- Lack of, or incorrect maintenance.
- Fair wear and tear, misuse, negligence, accidental damage, improper
storage, incorrect starting / warm-up / run-in or shutdown.
No warranty claim will be considered by STEPHILL unless any defective parts are available for
inspection by us, or our nominees, to determine the reason or cause of failure, and STEPHILL is
given the option of repair or replacement.
STEPHILL are not responsible for incidental or consequential damages, downtime, or other costs due
to warrantable failure, and unauthorised alterations made to any product supplied by STEPHILL.