To Next PageTo Next Page
Need help?Do you have a question about the DSE 521 and is the answer not in the manual?
Explains the three-position rotary switch (OFF, AUTO, MANUAL) for module operation.
Details the start sequence when a remote start signal is applied in AUTO mode.
Describes initiating a start sequence in MANUAL mode without external pushbuttons.
Explains latching shutdowns like Emergency Stop, Low Oil Pressure, High Engine Temp.
Lists pin assignments, descriptions, cable sizes, and notes for connectors.
Explains the function of each pin on PLUG "A" and PLUG "B".
General| Engine Start | Yes |
|---|---|
| Engine Stop | Yes |
| Door Lock/Unlock | Yes |
| Trunk Release | Yes |
| Starter Disable | Yes |
| Alarm | Yes |
| Smartphone Control | No |
| Keyless Entry | Yes |
| Battery Backup | No |
| Installation Required | Yes |
