Need help?Do you have a question about the DSE DSE7120 MKII and is the answer not in the manual?
Quick start guide for product installation.
Details voltage and current requirements for power supply.
Specifies voltage and frequency sensing parameters.
Specifies current sensing parameters and ratings.
Details digital and analogue input specifications.
Details DC and volt-free output specifications.
Explains the function of each front panel push-button.
Details operation in Manual Mode, including starting and stopping.
Details operation in Test Mode, including starting and stopping.
Explains fully automatic operation in Auto Mode.
Lists adjustable parameters for module, CAN, inputs, outputs, timers, generator, mains, engine.
Recommended checks before starting the system.
Lists symptoms and possible remedies for starting issues.
Lists symptoms and possible remedies for loading issues.
Lists symptoms and possible remedies for alarm conditions.
General| Magnetic Input Frequency | 10, 000 Hz (max) |
|---|---|
| Storage Temperature Range | -40°C to +85°C |
| Display | LCD |
| DC Supply | 8 to 35 V DC |
| Input Voltage | 8 to 35 V DC |
| Communication Ports | RS232, RS485 |
| Dimensions | 240 mm x 172 mm x 57 mm |
| Cranking Dropouts | Able to survive 0 V for 50 ms |
| Alternator Input Range | 15 V to 300 V AC |
| Alternator Input Frequency | 50 Hz to 60 Hz |
| Magnetic Input Range | 0.5 V to 70 V AC |
| Protection Class | IP65 |
| Certification | CE |
To Next Page
