Need help?Do you have a question about the DSE DSE4510 and is the answer not in the manual?
Provides quick start installation guidance.
Outlines minimum/maximum voltage, current, and standby requirements.
Specifies measurement type, sample rate, and accuracy for voltage/frequency sensing.
Details module inputs and configurable DC outputs.
Describes USB and CAN communication ports.
Explains the function of each terminal on the module rear.
Provides typical wiring diagrams for system setup.
Explains earth system connections (negative, positive, floating).
Details the function of each push-button on the module.
Explains the different sections and icons on the module display.
Guides on navigating and viewing instrument data, alarms, and logs.
Provides a quick guide for starting and stopping the engine.
Explains Auto, Manual/Start, and Stop/Reset modes of operation.
Describes how engine maintenance alarms are configured and reset.
Explains the function of the inbuilt exercise run scheduler.
Describes how to enter and navigate the module's configuration editor.
Lists and explains configurable parameters for modules, CAN, inputs, outputs, timers, generator, mains, engine, sensors.
Details selectable parameters for inputs, outputs, alarm actions, sensor types, and units.
Provides remedies for common starting and loading problems.
Details common alarms, comms faults, and their possible remedies.
Addresses instrument reading issues and general configuration troubleshooting.
Lists part numbers for connector plugs, fixing clips, and sealing gaskets.
Provides disposal information for WEEE and RoHS compliance.
General| Type | Auto Start Control Module |
|---|---|
| Operating Temperature Range | -40 °C to +85 °C |
| Storage Temperature Range | -40°C to +85°C |
| Mounting | Panel Mount |
| Display | LCD Display |
| DC Supply | 8 V to 35 V Continuous |
| Input Voltage | 8 to 35 V |
| Communication Ports | RS485 |
| Input Frequency | 50 Hz / 60 Hz |
| Cranking Dropouts | Able to survive 0 V for 50 mS |
| Alternator Input Range | 15 V to 333 V AC |
| Alternator Input Frequency | 50 Hz - 60 Hz |
| Magnetic Input Frequency | 10, 000 Hz (max) |
| Protection Features | Overvoltage, Undervoltage, Overfrequency, Underfrequency |
| Certifications | CE |
To Next Page
