The Dsee-50s supports wall hanging and
bracket installation, with the following only
The method of wall hanging installation is
introduced. For vertical mounting of bracket,
please consult dealers.
1
W
all
Hanging
Fastener
I
nstallation
Illustration
Install the Fastener
Wall mounting fasteners are fixed directly to the wall using
expansion screws or ordinary screws
On,
make
sure the sheet metal parts are installed firmly to
prevent vibration
when
the equipment is rotating
Movement causes equipment to
fall
and become dangerous.
Fixing structure behind the
machine. Insert the
bottom
into
the wall hangingfixtur,
simultaneously. Screw the
M5
sheet metal parts as
shown
in
the figure. Set the screws
and
complete the installation.
M5
metal sheet parts
fixing screw
Installation Instructions
To Next Page
Loading...
General