dSPACE CLP1104 User Manual

■
■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■ ▼ Implementing and Handling Applications
DS1104 Hardware Installation and Configuration March 2004
61
▲ ■■■■■■■■■■I
▲■■■■■■■■■■■■■■■
How to Use ControlDesk
To observe the variables of a running real-time application, you have to
create a ControlDesk layout with an instrument such as a plotter, and
connect the instrument to the variables to be observed. For detailed
instructions, see below.
For instructions on how to change the parameters of a running
application with ControlDesk, see To use the demo experiment for
ControlDesk on page 66.
To observe the system behavior
1 Start ControlDesk.
N
Working with more than one dSPACE board in plug & play
configuration may cause assignment problems. For details, refer to
Problems with Multiple Plug & Play Boards on page 165.
2 If ControlDesk’s Platform Navigator displays more than one
dSPACE board in your system, it may be necessary to specify the
DS1104 as the working board: In the Platform Navigator, you can
recognize the working board by its bold print. If the DS1104 is not
the current working board, choose Platform – Set Working
Board … to call up the Set Working Board dialog.
3 Use the Platform Navigator to load the SDF file smd_1104_hc.sdf
from %DSPACE_ROOT%\Demos\DS1104\GettingStarted\HandCode . For
information on how to download, start and stop a real-time
application on your system, see Handling Real-Time Applications
on page 50.
The hierarchical structure of the model and its variables are
displayed in the Variable Browser, a page of the Tool Window.

dSPACE CLP1104 Specifications

General

Brand	dSPACE
Model	CLP1104
Category	Controller
Language	English