What to do if dSPACE Controller DS1104 does not operate correctly?
First, ensure the host PC is running correctly. Use ControlDesk’s Platform Manager to check the board properties. Also, check the PCI interface clock rate by observing the red LED on the board. If the LED is lit, it indicates that the host PC’s PCI bus for the DS1104 is over- or underclocked.
General| Clock Speed/Rate | 250 MHz |
|---|---|
| RAM | 32 MB |
| Flash Memory/Storage | 8 MB |
| ADC Channels | 16 |
| DAC Channels | 2 |
| Digital I/O Channels | 32 |
| Timer Channels | 4 |
| PWM Channels | 8 |
| CAN Interfaces | 2 |
| Power Supply | 9-36 V DC |
| ADC Resolution | 16 bit |
| DAC Resolution | 12 bit |
| Serial Interfaces | 2 (RS232) |
| Ethernet | 10/100 Mbps |
| Operating System | Real-time interface (RTI) |
Describes the hardware components of the DS1104 R&D Controller Board.
Outlines essential safety measures during hardware installation and connection.
Details safety guidelines for handling and using connector panels.
Step-by-step instructions for installing the DS1104 board into a host PC.
Discusses methods for creating real-time applications using Simulink or C.
Covers downloading, starting, and stopping applications on the real-time processor.
Detailed steps for connecting external devices directly to the DS1104 board.
Instructions for connecting external devices via a connector panel.
Details the pin assignments for the DS1104's various connectors.
Describes the pinouts for the CP1104 and CLP1104 connector panels.
Technical specifications for the DS1104 R&D Controller Board.
Steps to diagnose issues when the DS1104 is not operating correctly.
Addresses issues arising from using multiple dSPACE boards in plug & play mode.
To Next Page
