■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
▼
Implementing and Handling Applications
DS1104 Hardware Installation and Configuration March 2004
55
▲
■■■■■■■■■■I
▲■■■■■■■■■■■■■■■
How to Handle Applications for the
Flash Memory
An application loaded to the flash memory is started automatically
when you reboot your system (host PC).
If you want to prevent the system from booting a flash application,
you have to clear the application from the flash memory (refer to
Clearing an application on page 57).
To download a real-time application to the flash memory and
start the RTP
1 In the Platform Navigator, select the board.
2 From the context menu of the Platform Manager, choose Load
Application to Flash.
3 Choose an application (that is, the SDF file or the PPC file) in the
Load Application to RTP dialog.
N
If you load an application when your system is still running, a
dialog similar to the following opens.
If you confirm the message with Yes, the running application is
stopped before the new application is downloaded and started.
To Next Page
Loading...
Need help?
General
