Safety Precautions
▲
■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
DS1104 Hardware Installation and Configuration March 2004
I■■■■■■■■■■■■■
▼
18
■■■■■■■■■■■■■■■▼
Safety Precautions for Installing and
Connecting the Hardware
Installation sequence ■ Install the components of your system in exactly the order stated.
Any other sequence may lead to unpredictable results or even
damage the system.
■ Read the instructions carefully before starting installation.
■ Note all warnings given.
Handling boards dSPACE boards contain sensitive electronic devices. Before unpacking,
installing and removing them, take the following precautions to avoid
damage caused by high electrostatic voltage:
■ Make sure that you and all material the board comes in contact
with are properly grounded.
■ During storage or handling, place the board on conductive foam or
in a protective bag.
■ Do not touch the board connectors.
Improper handling will damage the fan of the board.
■ Do not touch any components of the fan, neither during operation
nor when it has stopped.
■ Do not try to stop a rotating fan with your fingers or with the help
of tools.
■ Do not apply pressure to the fan bearing during installation and
removal of the board.
To Next Page
Loading...
Need help?
General
