Connector Pinouts and LEDs
▲
■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
DS1104 Hardware Installation and Configuration March 2004
I■■■■■■■■■■■■■
▼
80
■■■■■■■■■■■■■■■▼
DS1104 Connectors
The DS1104 is equipped with the following connectors:
■ I/O Connector (P1) on page 81
■ Master PPC Debug Connector (P2) on page 85
■ Slave DSP Debug Connector (P3) on page 86
■ Slave DSP Flash Jumper (J1) on page 87
N
Prior to connecting external devices to the board, ensure you have
familiarized yourself with the relevant instructions provided in
Connecting External Devices to the dSPACE System on page 71.