dSPACE DS1104 User Manual

■
■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■ ▼ Implementing and Handling Applications
DS1104 Hardware Installation and Configuration March 2004
59
▲ ■■■■■■■■■■I
▲■■■■■■■■■■■■■■■
Experimenting with
ControlDesk
To observe the behavior of the real-time application and to change
application-specific parameters, use dSPACE’s experimentation tool
ControlDesk.
For detailed information on ControlDesk and its features, refer to the
ControlDesk Experiment Guide.
Required files To experiment with a real-time application, three application-specific
files are required: see How to Generate the Required Files on page 60.
Demo model The demo model smd_1104_hc introduces you to ControlDesk’s
experimentation features. If you want to use a Simulink application,
use the demo smd_1104_sl instead.
The related files are located in
%DSPACE_ROOT%\Demos\DS1104\GettingStarted\HandCode or
%DSPACE_ROOT%\Demos\DS1104\GettingStarted\Simulink
For instructions on how to monitor the variables and change the
parameters of a running application using ControlDesk, see How to
Use ControlDesk on page 61.

dSPACE DS1104 Specifications

General

Brand	dSPACE
Model	DS1104
Category	Controller
Language	English