EasyManua.ls Logo

dSPACE DS1103 - User Manual

Default Icon
302 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DS1103 PPC Controller Board
Hardware Installation
and Configuration
Release 2014‑B – November 2014

Table of Contents

Other manuals for dSPACE DS1103

Preview: Hardware Installation And Configuration
Hardware Installation And Configuration254 pages

Questions and Answers

  • J
    Justin ScottAug 1, 2025
    What to do if pinging dSPACE Controller 192.100.100.98 times out?
    • A
      Alison DanielAug 1, 2025
      If you are experiencing a timeout when pinging 192.100.100.98, verify that the network adapter of your host PC is correctly installed and configured. Ensure the correct crossed-over patch cable is connected and that the expansion box is switched on. Also, check if the expansion box is configured to the correct IP address and confirm that the IP address of the host PC is set to 192.100.100.1.
  • K
    Kara SchaeferAug 5, 2025
    How to troubleshoot integration problems of dSPACE Controller expansion box in a network?
    • S
      Shirley BuckAug 5, 2025
      To troubleshoot integration problems, check that the network adapter of the host PC has been correctly installed and configured. Also, verify that the correct standard patch cable is connected and the expansion box is switched on. Ensure the expansion box is configured to the correct IP and that the previous TCP/IP configuration of the host PC was restored properly.
  • K
    Kristy YoungAug 9, 2025
    How to find lost IP address of dSPACE Controller?
    • S
      Stephen WilsonAug 9, 2025
      If the IP address of the expansion box is unknown, connect a VGA monitor to the slot CPU. The IP address is displayed during power-up.
  • A
    Andrew HamptonAug 13, 2025
    What to do if pinging 127.0.0.1 on dSPACE DS1103 times out?
    • J
      jorge35Aug 13, 2025
      If pinging 127.0.0.1 results in a request timeout, check the configuration of the TCP/IP protocol.
  • M
    Melissa DavenportAug 18, 2025
    Why am I getting a 'Bad command or file name' error on dSPACE Controller?
    • R
      randy15Aug 18, 2025
      This error indicates that the TCP/IP protocol has not been installed properly. Reinstall the TCP/IP protocol.
  • S
    Sarah AllenAug 22, 2025
    What does it mean if the name specified is not recognized as an internal or external command for dSPACE DS1103 Controller?
    • M
      Morgan JohnsonAug 22, 2025
      This error message indicates that the TCP/IP protocol has not been installed correctly. You should reinstall the TCP/IP protocol.
  • J
    Jay GarciaAug 27, 2025
    What to do if dSPACE DS1103 Controller is unable to contact IP driver, error code x found?
    • E
      eparksAug 27, 2025
      This error indicates that the TCP/IP protocol has not been installed properly. Reinstall the TCP/IP protocol.

Summary

Safety Precautions

Safe Invehicle Usage of dSPACE Products

Guidelines for safe in-vehicle use of dSPACE products, requiring enclosed test tracks and safety-secured environments.

Safety Precautions for Transportation

Precautions for transporting the DS1103 PPC Controller Board to prevent damage during shipment and handling.

Safety Precautions for Installing and Connecting the Hardware

Guidelines for safe installation, handling electrostatic sensitive devices (ESD), and connecting hardware components.

Safety Precautions for Using AutoBox;Tandem-AutoBox in a Vehicle

Special guidelines for safe operation of AutoBox/Tandem-AutoBox in vehicles, covering engine and battery connections.

Safety Precautions for Using Connector Panels

Guidelines for safe operation of connector panels, including handling, cleaning, and avoiding foreign objects.

Before You Start

Installation and Configuration Overview

Overview of the DS1103 installation and configuration procedures, including installation sequence and next steps.

Checking the System Requirements

Installing the Hardware

Resource Requirements of dSPACE Boards

Setting up the DS1103

Installing the DS1103

Step-by-step instructions for installing the DS1103 board in a host PC or expansion box.

Installing AutoBox;Tandem-AutoBox in a Vehicle

Guidelines for installing AutoBox/Tandem-AutoBox in a vehicle, covering mounting instructions and wiring diagrams.

Connecting an Expansion Box to the Host PC

Safety Precautions for Using Expansion Boxes

Guidelines for safe operation of expansion boxes, including installation, grounding, and power management.

Connecting via Ethernet

Connecting via Bus Interface

Connector Pinouts and LEDs

Signal Connection to External Devices

Analog Inputs

Analog Outputs

Serial Interface

CAN Bus Interface

Troubleshooting

Hardware Problems

Common hardware issues with DS1103, including plug & play problems and expansion box connection issues.

Problems with the Ethernet Connection

Troubleshooting Ethernet connection issues, including general errors, IP address problems, and BIOS setup.

Accessories

dSPACE DS1103 Specifications

General IconGeneral
Clock Speed/Rate40 MHz
PWM Channels8
A/D Converters16
Incremental Encoder Interfaces4 channels
Serial InterfacesRS232
Analog Outputs8 channels
Memory512 KB
Operating SystemReal-time operating system (RTOS)

Related product manuals