dSPACE DS1103 User Manual

Introduction to the DS1103
The dSPACE system based on the DS1103 PPC Controller Board
comprises hardware and software.
Objective
Information in this section
Hardware 21
Software 22
Hardware
The DS1103 PPC Controller Board is specifically designed for
development of high-speed multivariable digital controllers and
real‑time simulations in various fields. It is a complete real-time
control system based on a PowerPC processor. For advanced I/O
purposes, the board includes a slave-DSP subsystem based on the
Texas Instruments TMS320F240 DSP microcontroller.
Board description
The DS1103 PPC Controller Board is a standard PC/AT card that can
be plugged into a PC using the ISA bus as a backplane. The card can
also be inserted in a dSPACE expansion box communicating with the
host PC via an ISA-bus extension or Ethernet.
Installation location
Where to go from here
DS1103 Hardware Installation and Configuration November 2014
21
t

dSPACE DS1103 Specifications

General

Brand	dSPACE
Model	DS1103
Category	Controller
Language	English