Connector Panel Enclosures
Connector and LED Panels
The connector and LED panels are installed in a 19" desktop box
made from aluminum profiles as standard. They can optionally be
mounted in a 19" industry rack.
Objective
Information in this section
19" Desktop Enclosure 297
19" Rack Enclosure 298
19" Desktop Enclosure
The illustration below shows the outer dimensions of the 19" desktop
enclosure for connector and LED panels (CPs, CLPs and LPs).
d = 144 mm
(5.66 inch)
l = 434 mm (17.08 inch)
h = 80 mm
(3.14 inch)
Dimensions
Where to go from here
s
Connector Panel Enclosures
t
DS1103 Hardware Installation and Configuration November 2014
297
t
To Next Page
Loading...
