dSPACE DS1103 - Installation in the Expansion Box

Board Slot
Type
Required
I/O
Address
Range
Default
I/O Base
Address
Required
Memory
Range
Required
IRQ
DS819
1)
PCI
Express
10H Plug &
Play
None 1 (PCI
Express)
DS821
1)
Express
Card
10H Plug &
Play
None 1 (PCI
Express)
1)
Supported by the dSPACE software as of dSPACE Release 5.2.
Installation in the Expansion Box
When installed in an expansion box, dSPACE boards require the
following resources in the expansion box:
The resource requirements listed in this table apply to the
expansion box, not to the host PC.
Resources in the expansion
box
Board Required Address
Bytes
Default I/O
Base Address
Required Memory Required
IRQ
DS1005 10H 300H None None
DS1006 up to board
revision DS1006-03
10H 300H None None
DS1006 as of board
revision DS1006-06
(multicore processor
board)
40H 300H None None
DS1103 10H 300H None None
DS2302 10H 380H None None
The DS1007 PPC Processor Board does not need any
resources in the expansion box.
s
Installing the Hardware
t
32
s
DS1103 Hardware Installation and Configuration November 2014