dSPACE DS1103 - PX10 Data Sheet

Information in this section
PX10 Data Sheet 251
PX10: Ensuring Correct Operating Temperatures 252
PX10 Dimension Drawings 256
PX10 Data Sheet
The following table provides the technical characteristics of the PX10:
Technical data
Parameter Specification
Chassis General n Desktop box
n 19” rack‑mount version available
Slots n 10 full-size 16-bit ISA slots
n 1 slot reserved for Link Board or slot CPU
board for Ethernet connection
Cooling n Active cooling with temperature controlled
fans (with dust filter)
n Dust filter: A pack of three replacement
filters is available. Order number:
FILTER_PAD_PX10
Power supply General n Mains voltage 100 … 240 V / 50-60 Hz
n As of revision 1.4: active PFC (Power Factor
Correction) >= 0.95
Maximum output
power
n Up to revision 1.2: 200 W
n As of revision 1.3: 250 W
Maximum output current
(The sum of the output
currents must not exceed
the maximum output
power of the supply rails.)
Up to revision 1.2 n 22 A @ +5 V
n 7 A @ +12 V
n 0.7 A @ –12 V
Up to revision 1.3 n 33 A @ +5 V
n 8 A @ +12 V
n 3 A @ –12 V
As of revision 1.4 n 40 A @ +5 V
n 10 A @ +12 V
n 1 A @ –12 V
Where to go from here
s
dSPACE Expansion Boxes
t
DS1103 Hardware Installation and Configuration November 2014
251
t