Connecting External Devices to
the dSPACE System
Prior to connecting external devices to the board or a connector
panel, ensure you have familiarized yourself with the related
instructions.
Objective
Information in this section
How to Connect External Devices to a Board 93
How to Connect External Devices to a Connector
Panel
95
How to Connect External Devices to a Board
To connect external devices to the DS1103
N O T I C E
Connecting external devices while the power supply
is switched on may damage the dSPACE hardware.
n Do not connect or disconnect any device while the
power supply is switched on.
n Turn off the host PC, the expansion box (if used), and
the external devices beforehand.
1 Turn off all external devices which are to be connected to the
dSPACE system.
Where to go from here
Method
DS1103 Hardware Installation and Configuration November 2014
93
t
To Next Page
Loading...
Need help?
General
