dSPACE DS1103 - Tandem-Autobox; Tandem-Autobox Data Sheet (Tandem-Autobox up to Version 4.0)

Tandem-AutoBox
Tandem-AutoBox is a special expansion box for using your dSPACE
real-time hardware for in-vehicle control experiments. It can be
mounted anywhere in a vehicle and connected to a car battery.
The main differences between AutoBox and Tandem-AutoBox are the
following:
n Tandem-AutoBox nearly doubles the space for inserting dSPACE
boards.
Objective
Information in this section
Tandem-AutoBox Data Sheet (Tandem-AutoBox up
to Version 4.0)
286
Tandem-AutoBox: Ensuring Correct Operating
Temperatures
289
Tandem-AutoBox Dimension Drawings 291
Power Input Connector 293
Lab Power Supply for Tandem-AutoBox 295
Tandem-AutoBox Data Sheet (Tandem-AutoBox up to
Version 4.0)
The following table provides the technical characteristics of the
Tandem‑AutoBox.
Technical data
Parameter Specification
General Chassis n Compact aluminum chassis
n Shock mounts with rubber shoes
Slots n 14 full-size 16-bit ISA slots
n 1 slot reserved for Link Board or slot CPU board for
Ethernet connection
Cooling and heating n Temperature‑controlled fan with dust filter
1)
n Heater (optional)
1)
n Dust filter: A pack of three replacement filters is
available. Order number: FILTER_PAD_ABX
Where to go from here
s
Accessories
t
286
s
DS1103 Hardware Installation and Configuration November 2014