Signal Connection to External
Devices
This chapter provides descriptions of the on-board I/O circuits, lists
important electrical characteristics and gives notes and tips on signal
conditioning and signal connection to external devices.
The information given is sorted according to the I/O units of the
DS1103.
Objective
Information in this section
Power Supply Outputs 162
Analog Inputs 163
Analog Outputs 165
Bit I/O 168
Slave DSP Bit I/O 171
User Interrupt Inputs 175
Incremental Encoder Interface 177
Serial Interface 187
CAN Bus Interface 193
Where to go from here
DS1103 Hardware Installation and Configuration November 2014
161
t
To Next Page
Loading...
