DS1103 Components
Prior to connecting external devices to the board, ensure
you have familiarized yourself with the relevant instructions
provided in the Connecting External Devices to the dSPACE
System on page 93.
Connecting external devices
Information in this section
Overview
Board Overview
Contains an illustration of the board, showing the locations of
connectors, jumpers and LEDs.
105
I/O connectors of the DS1103
Analog Connector (P1) 107
Digital Connector (P2) 112
Incremental Encoder/Digital Connector (P3) 117
Other components
Slave DSP Debug Connector (P6) 123
Slave DSP Flash Jumper (J1) 123
Status LEDs of the DS1103 124
Where to go from here
s
Connector Pinouts and LEDs
t
104
s
DS1103 Hardware Installation and Configuration November 2014
To Next Page
Loading...
