Grounding and Shielding
Proper grounding and shielding reduces noise and inductive effects.
The advice given here also applies to the cabling of the
devices inside your test bench. It is better to eliminate the
cause, than to reduce the effects.
Objective
Information in this section
Definitions of Different Ground Signals
There are often different terms for ground signals which are often mixed
up.
197
Grounding Signals
Provides notes on cabling and connecting ground lines as well as further
background information.
197
Shielding
Provides notes on cabling and connecting the shield as well as further
background information.
198
Information in other sections
Influences on Board Performance Using
AutoBox/Tandem-AutoBox
To handle the voltages and currents from a car battery, the boxes are
supplied with a special power supply. If noise seems to be a problem for
your dSPACE boards installed in the AutoBox/Tandem-AutoBox, you
should consider the information in this chapter.
206
Where to go from here
s
General Notes and Tips on Signal Conditioning
t
196
s
DS1103 Hardware Installation and Configuration November 2014
To Next Page
Loading...
Need help?
General
