Information in this section
AutoBox Data Sheet (AutoBox up to Version 3.0) 269
AutoBox Data Sheet (AutoBox Version 4.0 and later) 272
AutoBox: Ensuring Correct Operating Temperatures 275
AutoBox Dimension Drawings 277
Power Input Connector 279
AutoBox Status LEDs (Integrated as of AutoBox
Version 4.0)
281
Lab Power Supply for AutoBox 285
AutoBox Data Sheet (AutoBox up to Version 3.0)
The following table provides the technical characteristics of the
AutoBox.
Technical data
Parameter Specification
General Chassis n Compact aluminum chassis
n Shock mounts with rubber shoes
Slots n 7 full-size 16-bit ISA slots
n 1 slot reserved for Link Board or slot CPU board for
Ethernet connection (both not required for PHS-bus
systems based on DS1007)
Cooling and heating n Temperature‑controlled fan with dust filter
n Heater (optional)
n Dust filter: A pack of three replacement filters is
available. Order number: FILTER_PAD_ABX
Where to go from here
s
dSPACE Expansion Boxes
t
DS1103 Hardware Installation and Configuration November 2014
269
t
To Next Page
Loading...
