What to do if dSPACE CLP1104 DS1104 does not operate correctly?
First, ensure the host PC is running correctly. Use ControlDesk’s Platform Manager to check the board properties. Also, check the PCI interface clock rate by observing the red LED on the board. If the LED is lit, it indicates that the host PC’s PCI bus for the DS1104 is over- or underclocked.
General| Brand | dSPACE |
|---|---|
| Model | CLP1104 |
| Category | Controller |
| Language | English |
Provides essential safety guidelines for hardware installation and connection to prevent damage.
Offers safety recommendations for handling and using connector panels to ensure safe operation.
Outlines the general steps and sequence for system installation and configuration.
Details the necessary system requirements that must be met before installing dSPACE hardware.
Provides step-by-step instructions for installing the DS1104 R&D Controller Board into a host PC.
Explains how to connect CP/CLP connector panels to the DS1104 board for external device connectivity.
Guides users on how to start and navigate the ControlDesk software to manage the dSPACE system.
Details the process of loading a system check application to confirm correct hardware installation.
Provides information on how to update the firmware on the DS1104 board, if necessary.
Covers downloading, starting, and stopping applications on the real-time processor.
Details using ControlDesk for observing application behavior and changing parameters.
Guides on using ControlDesk to observe system behavior, create layouts, and manage instruments.
Provides instructions for connecting external devices directly to the DS1104 board's I/O connector.
Outlines the procedure for connecting external devices to the dSPACE system via a connector panel.
Details the steps required to safely remove the dSPACE board from the host PC.
Describes the analog input channels, including ADC types and connection details.
Details the analog output channels, including DAC specifications and connection information.
Offers steps to diagnose and resolve issues when the DS1104 is not operating correctly.
Addresses potential issues arising from using multiple dSPACE boards in a plug & play configuration.
Provides guidance on checking the host PC's operation if it malfunctions after DS1104 installation.
To Next Page
