dSPACE DS1103 User Manual

AutoBox Status LEDs (Integrated as of AutoBox Version
4.0)
As of AutoBox Version 4.0, the AutoBox is equipped with four multi-
color LEDs, which display the current status of the power supply of
the AutoBox:
n There is one main status LED available on the bracket of the power
supply board.
n There are three diagnostic LEDs on the component side of the
power supply board.
Objective
The multi-color LEDs show states, warnings and errors in different
colors and with flashing codes. The frequency of a flashing LED is 1
Hz. In the illustration below the flashing codes are explained in
general. The colors are examples.
LED is lit
LED flashes with short on-time and long off-time
LED flashes with long on-time and short off-time
LED is lit most of the time and flashes in another color
Possible displays of the
LEDs
s
dSPACE Expansion Boxes
t
DS1103 Hardware Installation and Configuration November 2014
281
t

dSPACE DS1103 Specifications

General

Brand	dSPACE
Model	DS1103
Category	Controller
Language	English