dSPACE DS1104 User Manual

Before You Start ▲ ■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
■
DS1104 Hardware Installation and Configuration March 2004
I■■■■■■■■■■■■■ ▼
22
■■■■■■■■■■■■■■■▼
Installation and Configuration
Overview
C
CAUTION! Changing the installation sequence may lead to
unpredictable results or even damage the system.
■ Install the components of your system in exactly the order stated.
■ Read the instructions carefully before starting installation.
■ Consider all warnings given.
Installation sequence Installing the DS1104 requires the following steps in the specified
order.
1. Check whether the software has been installed on the host PC.
You must first install the software before installing any hardware
component in the host PC. For detailed instructions on installing
the software, refer to Installing dSPACE Software in the dSPACE
Software Installation and Management Guide.
N
You need administrator rights to install dSPACE software.
2. Check whether your hardware meets the requirements for
DS1104. Refer to Checking the System Requirements on page 24.
3. Now you can install the hardware. Refer to Installing the Hardware
on page 25
4. To verify that your system works correctly, it is recommended that
you load a check application to your board. For detailed
instructions, refer to Verifying the System on page 31.

dSPACE DS1104 Specifications

General

Brand	dSPACE
Model	DS1104
Category	Controller
Language	English