7- MOUNTING / REPLACING THE LAMP
WARNING
Turn off the lamp, switch off the unit and unplug the
Mains power cable before opening the unit head covers.
Let the projector cool for at least 20 minutes before replacing the lamp.
Wear protective gloves prior to performing the replacement.
REPLACEMENT LAMP (D.T.S. Code 0505S039) :
Osram SIRIUS HRI
Power 440W
Luminous flux 24.000 lm
Colour temperature 7.500K typ.
Rated life 1.500 hours
Type of connection: Male FASTON pins 2.8 x 0.8 mm or screw terminals
The use of any other alternative lamp is not recommended and will null and void the
fixture's warranty.
To Next Page
Loading...
