DTS EVO - Hidden Menu for Technical Personnel; Calibration and Settings Access; Exiting Hidden Menu

27
DEFAULT CAL.
MENU ENTER DOWN UP
SET ALL MOTORS AT 128
POWER SETUP
MENU ENTER DOWN UP
SHOW HIDDEN SETTINGS
CALIBRATION
MENU ENTER DOWN UP
MOTORS ALIGNMENT
127
PAN
CALIBRATION FANS SETTING
MENU ENTER DOWN UP
LIVE-TOUR
EXIT TO MAIN
MENU ENTER DOWN UP
15- HIDDEN MENU (only for technical personnel)
To operate this menu:
- Connect the projector to the DMX controller (DMX SIGNAL MUST BE CORRECTLY
RECEIVED)
- Reset EVO (reset from the MENU, not from the DMX controller).
- While reset is running, press the MENU and ENTER keys at the same time.
ELECTRONIC CALIBRATION OF
THE MOTORS
RESET ALL SETTINGS TO VALUE 128
FANS / POWER SETTINGS MENU
EXIT FROM HIDDEN MENU
FANS SETTING MENU