8- VOLTAGE AND FREQUENCY
EVO with electronic ballast can operate at 90-260Vac 50-60 Hz.
9- INSTALLATION
EVO may be either floor or ceiling mounted.
For floor mounting installations, EVO is supplied
with four rubber mounting feet on the base.
For ceiling mounted installations, we recommend
the use of appropriate clamps to fix the unit to the
mounting surface.
The supporting structure from which the unit is hung should be capable of bearing the
weight of the unit, as should any clamps used to hang it.
The structure should also be sufficiently rigid so as not to move or shake whilst the
EVO is moving.
Four 1/4 turn Fast Locks connections placed in the base of the unit allow to hang the
EVO by using the two omega clamps (provided in the box) in conjunction with fixing
clamps for truss (fixing clamps are not included into the unit box).
To Next Page
Loading...
