4- TECHNICAL FEATURES
Colour generation
Linear CMY
Linear CTO
21-colour wheel
Two-tone generation
Dynamic effects
Overlapping wheels for multiple effects:
Customizable rotating gobo wheel (8 gobos + Studio Open + Open)
Fixed gobo wheel (17 gobos + Animation sector + Open)
Circular 8-facet and linear rotating prisms
Dyna-Prism (D.T.S. Patent Pending)
Interface / Control / Programming
Li-Fe backup battery for controlling the main parameters even when EVO is not
powered
LCD graphic display + 4 soft-keys (control / management / monitoring of the main
parameters)
RDM
Art-Net ready
Wireless ready
Updatable internal operating system
DMX
32 DMX channels
Pan & Tilt
‘FPR’ system (D.T.S. patent)
Pan: limitless rotation, in both directions;
360° rotation in 1.56 sec.; Tilt 270°: 1,5 sec.
Tri-phase stepper motor technology for ultra-fast silent movements
16-bit resolution
Selectable speed ranges
Pan / Tilt lock
Power supply
Electronic ballast: 90-260Vac 50-60 Hz
Power consumption: 600W with PFC
Power saving mode (the lamp dims to 80% after shutter closure)
Connection
DMX: XLR panel connectors (3 poles In/Out; 5 poles In/Out)
Power supply: POWERCON panel connectors (In/Out)
Operating ambient temperature
-10° / 40°
Internal safety devices
Overvoltage circuit protection and overtemperature circuit protection
To Next Page
Loading...
