How to fix a Dual XDM6350 that won't turn on?
If your Dual Car Receiver isn't powering on, there could be a few reasons. First, check the yellow wire connection and ensure it's receiving the correct voltage (11~16VDC). Next, verify the black wire is properly connected to ground. Finally, inspect the fuse and replace it if it's blown.
What to do if my Dual Car Receiver has power but no sound?
If your Dual Car Receiver turns on but you're not getting any sound, the issue likely lies with the speaker connections. Check the connections at the speakers to ensure they are properly connected. Also, make sure that none of the bare speaker wires are touching each other or the chassis ground; insulate them if they are.
Why does my Dual Car Receiver keep blowing fuses?
If your Dual Car Receiver is blowing fuses, there are a few potential causes. Check the yellow or red wire to see if it's touching the chassis ground, looking for any pinched wires. Also, inspect the speaker wires to ensure they aren't touching the chassis ground, again checking for pinched wires. Finally, verify that you are using a fuse with the correct rating.
How to stop my Dual XDM6350 from skipping?
Excessive skipping on your Dual Car Receiver can be due to a couple of things. Make sure the unit is mounted correctly and that the backstrap is secure. Check the mounting sleeve and backstrap support. Also, inspect the media (CD, CD-R, or CD-RW) for any physical defects like scratches.
What to do if my Dual XDM6350 Car Receiver won't accept a disc?
If your Dual Car Receiver won't accept a disc, it could be due to a couple of reasons. First, try pressing and holding the EJECT button for 3 seconds to reset the CD mechanism position. Also, check for and remove the 2 transit screws located on top of the unit.
What does ERROR-01 mean on my Dual XDM6350?
If you see ERROR-01 on the display of your Dual Car Receiver, it indicates a disc read error. Try pressing the EJECT or RESET button.
What does ERROR-02 mean on my Dual XDM6350 display?
If ERROR-02 appears on your Dual Car Receiver's display, it suggests a focus error or that the disc is inserted upside down. Try pressing EJECT or RESET.
Why does 'PROTECT' appear on my Dual Car Receiver display?
If 'PROTECT' is displayed on your Dual Car Receiver, it means the WMA file is copy-protected by DRM (Digital Rights Management). To resolve this, write the disc using WMA files that are not copy-protected.
What does 'NO FILE' mean on my Dual Car Receiver?
If 'NO FILE' appears on the display of your Dual Car Receiver, it means the selected file is not available in direct or alphanumeric search modes. Repeat the search using valid parameters.
General| Type | Digital Media Receiver |
|---|---|
| Peak Output | 200 Watts |
| Channels | 4 |
| Subwoofer Preamp Output | Yes |
| USB Input | Yes |
| AUX Input | Yes |
| Bluetooth | Yes |
| Touchscreen | Yes |
| Radio Tuner | AM/FM |
| Steering Wheel Control Ready | Yes |
| Remote Control | Yes |
| SD Card Slot | No |
| Display Type | LCD |
| Display Size | 6.2 inch |
Steps to prepare the unit and vehicle for installation.
Safety and environmental precautions for installation.
Step-by-step guide for mounting the unit.
Illustrates the electrical connections for the unit.
Identifies and explains the controls on the main unit.
Identifies and explains the buttons on the remote control.
Covers basic functions, setup menu, audio adjustments, clock settings, and volume control.
Instructions for using the AM/FM tuner, including seek and presets.
How to insert, eject, and control playback of CDs.
Details playback, file/folder search, display info, character support, compatibility, and technical specs for MP3/WMA CDs.
Covers connecting USB, playback, file search, display info, compatibility, and charging.
To Next Page
