79
E
Brakes
Front brake
With double drilled disc.
Material:
steel
Disc diameter:
320 mm
Hydraulically operated by a control lever on right
handlebar.
Braking surface:
88 sq cm
Brake calipers with separate pistons.
Make:
BREMBO
Type:
30/34-4 pistons
Friction material:
TOSHIBA TT2802.
Master cylinder type:
PS 16.
Rear brake
With fixed drilled steel disc.
Disc diameter:
245 mm
Hydraulically operated by a pedal on RH side.
Braking surface:
25 sq cm
Brake calipers with separate pistons.
Make:
BREMBO
Type:
P 34.
Friction material:
FERIT I/D 450 FF
Master cylinder type:
PS 11.
Warning
Brake fluid can dissolve paintwork and cause
severe eye and skin injuries in the event of accidental
spilling. Wash the affected area with abundant running
water.
To Next Page
Loading...
