Do you have a question about the Ducati ST2 and is the answer not in the manual?
Displacement | 944 cc |
---|---|
Bore x Stroke | 94 mm x 68 mm |
Transmission | 6-speed |
Fuel System | Electronic fuel injection |
Frame | Tubular steel trellis |
Rear Brakes | 245 mm disc, 2-piston caliper |
Front Tyre | 120/70 ZR 17 |
Rear Tyre | 170/60 ZR 17 |
Wheelbase | 1430 mm |
Seat Height | 820 mm |
Power | 83 hp @ 8500 rpm |
Torque | 84 Nm @ 6500 rpm |
Front Brakes | 2 x 320 mm discs, 4-piston calipers |
Fuel Capacity | 21 liters |
Engine Type | L-twin, 4-valve per cylinder, desmodromic |
Rear Suspension | Progressive linkage with adjustable monoshock |
Details the location and function of controls essential for motorcycle operation.
Describes the ignition switch and steering lock functions and positions.
Operates the clutch for disengaging the engine from the gearbox.
Assists cold engine starting and increases idle speed after starting.
Used for emergency engine shutdown; must be returned to RUN for starting.
Controls the throttle valves for engine speed.
Operates the front brake hydraulically.
Applies the rear brake hydraulically.
Changes gears through up and down movements.
Identifies the positions of key components on the motorcycle.
Details engine type, bore, stroke, displacement, and compression ratio.
Describes the desmodromic valve train system.
Details front brake type, material, diameter, and caliper specifications.
Details rear brake type, diameter, and caliper specifications.
Describes the frame type, steering angles, and trail.
Details wheel type, dimensions, and tire specifications.
Describes the progressive rear suspension system and its adjustments.
Details the hydraulic upside-down front fork and its adjustments.
Maximum speed achievable in each gear under optimal conditions.
Details the motorcycle's weight in running order and fully loaded.
Instructions on how to safely stop the motorcycle.
Guidance on safe refueling practices.
Instructions for removing the headlamp fairing and related components.
Instructions for replacing burnt-out bulbs for lighting devices.