Ducky One X - Wired Mode; Ducky One X Connection Function

4
3
Connection Function
Wired mode
●Switch the connection mode selector to the mode
●Connect the keyboard to a PC using the included Type-C® cable
2.4 GHz mode
●Switch the connection mode selector to the mode
●Press Fn + Q/W/E/R to select the desired pairing host
●Press and hold FN + Q/W/E/R for three seconds to start pairing
●Turn on the BT connection on the device
●Follow the pairing instruction on the device
●Enter the pairing passkey on the keyboard when prompted
BT mode
●Switch the connection mode selector to the mode
●Connect the included 2.4 GHz wireless dongle to a PC