Dukane 4A3076B - Placing Stations on Programmed Emergency; Reviewing the Stations Placed on Emergency Priority; Removing Stations from Programmed Emergency

Placing Stations on Programmed Emergency
1. Contact the calling station by pressing that station’s numbered pushbutton.
The PRIORITY/LOCK LED indicator lights if the called station already has
emergency priority status.
2. Press the PRIORITY/LOCK pushbutton to change the station’s emergency
priority status. The PRIORITY/LOCK LED will either light or extinguish to
reflect the status change.
3. Press the calling station’s pushbutton again to disconnect from the station.
The PRIORITY/LOCK LED on the master flashes while any station is set to
emergency priority.
Reviewing the Stations Placed on Emergency Priority
The PRIORITY/LOCK LED flashes when the master is idle and one or more stations
have emergency priority status.
1. Press any station’s numbered pushbutton. The PRIORITY/LOCK LED lights
steadily if that station has emergency priority.
— or —
2. Press the PRIORITY/LOCK pushbutton while the master is idle. The LED indica-
tors of all stations having emergency priority light. Press PRIORITY/LOCK again
to return the master to idle.
Removing Stations from Programmed Emergency
1. Contact the station by pressing its numbered pushbutton. The PRIORITY/LOCK
LED indicator lights if the called station has emergency priority status.
2. Press the PRIORITY/LOCK pushbutton to change the station’s emergency prior-
ity status.
— or —
1. Press the PRIORITY/LOCK pushbutton while the master is idle. The LED indica-
tors of all stations having emergency priority light.
2. Press the pushbuttons of the stations you want to remove from emergency priority.
Press PRIORITY/LOCK again to return the master to idle.
18 ProCare 2000 Operation Manual
(Programmed
Emergency
Priority)