This water-resistant station is designed for use in patient showers. It is activated by
pulling the call cord, which places an emergency call to a master station. The call can
only be canceled from the originating station by pressing the CANCEL touchpad,
causing the LED indicator to go out.
1
Call Cord
Pulling the call cord places an emergency call to the master station and causes
the red section of the associated corridor and zone lights to flash.
2
Call Assurance LED
The call assurance LED flashes any time a call is placed from this station and
continues flashing until the call is canceled at the originating station.
3
CANCEL Touchpad
Press to cancel any pending call made from this station.
34
ProCare 2000 Operation Manual
Shower
Emergency
Station
Model
9A3006
3
2
1
To Next Page
Loading...