22 … 26
M • Edition 07.20 • Nr. 270 173
The VisionBox saves the information, they
can be shown again by pressing the “…”
button.
After the input is conrmed by pressing
the “OK” button the PDF document will be
generated.
The information which will shown in the
le can be selected by putting a check-
mark into the selection elds
Light grey elds cannot be shown.
The red coloured areas “General infor-
mation” and “Name” can be lled in by
the applicant. These information will be
shown in the front page of the documen-
tation.
To Next Page
Loading...
Need help?
General
