FORFEITURE OF THE WARRANTY
The warranty will be invalid in the following cases:
• The machine is used for purposes not complying with those for which it has been designed
or is used improperly.
• Failure to observe the instruction for use described in this manual.
• The machine is damaged due to the use of unsuitable detergents or aggressive and
unsuitable chemical products, like strong acid products: Static dissipative detergents,
Hydrochloric acid, trichloroethylene, methyl ethyl ketone, acetone, pure ammonia, bleach
or pure sodium hypochlorite, etc.
1.20 DISPOSAL AND WASTE SEPARATION
Pursuant to art. 13 of Legislative Decree of 25
th
July 2005, no. 151 “Fulfilment of the Directives
2002/95/EC, 2002/96/EC and 2003/108/EC on the restriction of the use of certain hazardous
substances in electrical and electronic equipment and disposal of their waste”.
The crossed-out bin symbol on the equipment indicates
that at the end of its lifespan, the
product, must be collected
separately from other waste.
The user must deliver the machine, at the end of its lifespan,
to an appropriate collection
point for the recycling of
electric and electronic equipment or deliver it back to the
retailer when purchasing a new equivalent machine on a one-to-one basis.
Correct disposal of the machine for its recycling and
treatment will help prevent
potential negative consequences for the environment and human health, and will
help
recycling the materials of which the machine consists.
DIFFERENTIATED SUBDIVISION OF THE MATERIALS
Electrical components:
Material that can be disposed of with the urban waste collection, in compliance with the legal
provisions in force in the country of use.
Mechanical components:
The machine is built with aluminum, steel and plastic materials.
Steel and aluminum will not damage the environment if recycled by qualified and authorised
companies.
The plastic materials may cause environmental damage, therefore they should be handed over
to specialised companies authorised for disposal.
The disposal of the packaging must be carried out in accordance with the regulations in force.
To Next Page
Loading...
