1.21 HELPFUL HINTS FOR USE
SPECIAL PRODUCTS AVAILABLE ON REQUEST
SILICONE SPRAY 400ml
To maintain the belts, before and after using our machines it is recommended to
lubricate the rubber conveyors with silicon spray. Code SIL400
HYDROSCALE 5 ltr
Use daily to inhibit the buildup of limescale, also helps with the cleaning
process. Code Hydroscale
TECHNICAL FEATURES
Harmonised Standard applied IEC/EN 60335-2-67
The Duplex floor-washing machines have been approved by the following Quality
Institutes:
ENEC
REGULATIONS: EN 5036:03 + A1:06, EN 55014-1:06 + A1:09, EN 55014-
2:97 + A1:01 +
A2:08, EN 60335-1:02 +A1:04 +A11:04 +A2:06 +A12:06 +
A13:08, EN 60335-2-67:09, EN 61000-3-2:06 + A1:09 + A2:09, EN 61000-3-
3:08, EN 62233:08
In compliance with the following provisions and Directives 2004/108/EC
(EMC), 2006/95/ EC (LVD)
To Next Page
Loading...