Duplo DocuCutter DPC-400 - Camera Registration Process; Camera Locator Setup

41
4-4 Camera Registration
➊Click “Setting”_setting_ in the menu of
Duplo USA
and select “Camera Locator (H)” in the
drop-down box of “Loc-type”
➋Re-Open
Duplo USA
and click “Icon”  button to pop up camera registration
window.
Click “Open file” and select required file, then open “Auto Task”, select the same file, set cut
quantity. Click “Locator settings”, select “batch production” while set the auto feeder ON.
Move the camera to the mark, click the “find the mark” button on the HMI, then the cutter
would search marks automatically. The machine would start cutting operation as registration
process finishes.