EasyManua.ls Logo

Duplo DocuCutter CC-229 - User Manual

Duplo DocuCutter CC-229
25 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DocuCutter CC-229 ver. ST20180814C
Operational Manual
Revision Date: 08/24/18
Before operating the machine, read this manual. Follow all safety precautions.
Duplo USA Corporation
3050 S. Daimler St, Santa Ana, CA 92705
www.duplousa.com

Table of Contents

Other manuals for Duplo DocuCutter CC-229

Preview: Service And Parts Manual
Service And Parts Manual56 pages

Questions and Answers

  • D
    Daniel ValenciaAug 3, 2025
    What to do if the Duplo Cutter has a paper jam?
    • Z
      zhowellAug 3, 2025
      If the Duplo Cutter experiences a paper jam, follow the clear jam procedure on page 24.
  • B
    bwaltonAug 9, 2025
    What to do if the waste bin is full in Duplo DocuCutter CC-229?
    • E
      Elizabeth LewisAug 9, 2025
      If the Duplo Cutter indicates that the waste bin is full, empty the waste bin.
  • B
    Brad BradshawAug 15, 2025
    How to fix miss feed on Duplo DocuCutter CC-229 Cutter?
    • L
      Lindsay MasonAug 15, 2025
      To address a miss feed issue on the Duplo Cutter: 1. Adjust the feed tray tension. 2. Adjust the side guide if it is too tight. 3. Fan the paper and reload it onto the feed tray.
  • C
    Craig WhiteAug 21, 2025
    What to do if Duplo Cutter shows top cover error?
    • S
      Susan JohnsonAug 22, 2025
      If the Duplo Cutter displays a top cover error, ensure that the top cover is closed.
  • F
    fitzgeraldbrettAug 27, 2025
    What to do if Duplo DocuCutter CC-229 shows rear cover error?
    • C
      Connor FloresAug 27, 2025
      If the Duplo Cutter displays a rear cover error, make sure that the rear cover is closed properly.

Summary

Safety Precautions

Specifications

Control Panel

Installation

Waste Bin and Sensor Installation

Steps for installing the waste bin and its sensor correctly for proper operation.

Stack Tray Installation

Instructions for attaching the stacking tray to the machine for output management.

Power Cord Connection

Setting Up Procedure

Paper Width and Guide Setup

Paper Loading and Tray Pressure

Slitter Adjustment and Registration

Pre-Define Jobs

Selecting a Job

User Define Job

Crease Skew Adjustment

Slitter Alignment

Clear Jam

Error Message and Trouble Shooting Guide

Duplo DocuCutter CC-229 Specifications

General IconGeneral
BrandDuplo
ModelDocuCutter CC-229
CategoryCutter
LanguageEnglish

Related product manuals