Duplo DP-21S II - Page 113

111
2
1
Appendix
○○○○○○○○○○○○○○○○○○○○○○○○○
Make the required settings on the
control panel.
Enlargement and Reduction, Plate Darkness,
Document mode, 94% Reduction, 2 IN 1
Function
○○○○○○○○○○○○○○○○○○○○○○○○○
Press (PLATE MAKING) key.
○○○○○○○○○○○○○○○○○○○○○○○○○
Check the finished plate. Adjust the
printing position, printing speed and
other settings as required.
Tip
•To make another test print, press
T
(TEST PRINT) key.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
●Print
○○○○○○○○○○○○○○○○○○○○○○○○○
Enter the number of prints on the
key pad.
Tip
•To change the number of prints,
press
C
(CLEAR) key, and enter
the desired number of prints.
○○○○○○○○○○○○○○○○○○○○○○○○○
Press (PRINT) key.
Tip
•To stop the machine midway during
operation, press (STOP) key.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○
Raise the paper stacker guides and
paper stopper, and adjust them to
the size of the printing paper.
○○○○○○○○○○○○○○○○○○○○○○○○○
Turning the power ON.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
●Platemaking.
○○○○○○○○○○○○○○○○○○○○○○○○○
Set the document in place.
○○○○○○○○○○○○○○○○○○○○○○○○○
Select the paper size.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Quick Operation Guide
ABC
T