Operating 12 V
DC
Appliances
To
operate
a 12 V DC appliance:
1.
Open the protective cover on the left side
of
the
Duracell® Powerpack. .
2.
Plug the
12
V DC appliance into the DC power socket on
the left side
of
the unit, and tum the
12
V DC appliance
on
(if
required).
If
the
12
V DC appliance draws more than
12
A (or has a
short-circuit defect), the internal circuit breaker
of
the
Duracell® Powerpack shuts
off
the powerto the
12
V DC
appliance.
If
this occurs, unplug the
12
V DC appliance,
and the internal circuit breaker automatically resets after
a few seconds.
3.
Fully recharge the Duracell® Powerpack as soon as
possible after each use.
As the DC power socket is internally wired directly to the
internal battery, extended operation
of
a
12
V DC appliance
may result in excessive battery discharge. See Caution for
"Equipment damage" on page
18.
975-0339-01-01
19
To Next Page
Loading...
