Replacing
the Incandescent light
. _
_.--
- -- .
--
- .
Replacing
the
Incandescent
Light
To
replace
the
light bulb:
1.
Tum the light switch off.
2.
Pop out the plastic lens cover.
3.
Gently grasp the bulb and twist clockwise to unscrew the
bulb.
4.
Insert a replacement bulb
of
the same type and rating into
the light reflector assembly.
5.
Gently grasp the bulb and twist counter-clockwise to
screw the bulb
in.
6.
Snap in the lens cover.
Replacing
the
External
Fuse
The replacement fuse must be rated at 250 A, 32 V DC. See
page 9 for the fuse location.
To
replace
the
external fuse:
1.
Remove the fuse cover.
2.
Unscrew the two bolts on the fuse.
3.
Replace the fuse. Ensure that the replacement fuse
is
rated at 250 A, 32 V DC and
is
of
the same type.
4.
Tighten the fuse with the two bolts.
5.
Replace the fuse cover.
32
975-0339-01-01
To Next Page
Loading...
