EasyManua.ls Logo

Duracell POWERPACK 600 - Recharging the Duracell Powerpack 600 Battery; Recharging with the AC Charger

Duracell POWERPACK 600
63 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Recharging the Duracell® Powerpack 600 Battery
Recharging
the
Duracell®
Powerpack
600
Battery
To
check the battery's charge level, press the Display
Function
button.
Note:
Battery
Charge
(%)
status
is
only accurate when the
Duracell® Powerpack has been disconnected from all appliances
and all charging sources for
15
minutes.
You
can recharge the battery using:
the fully automatic "plug-in-and-forget" AC charger.
the DC charging cable to recharge from your vehicle as
you drive.
a generator equipped with a regulated
12
V battery
charging outlet.
a solar panel.
Recharging
with the
AC
Charger
Recharging with the AC charger is a true "plug-in-and-
forget" charging method.
Ii'
CAUTION
.
~
Do not operate AC or DC appliances while the Duracell®
Powerpack is being recharged with the AC charger.
The AC charger may be permanently damaged
if
AC appliances or
12
V DC appliances are operated while the AC charger is
connected.
To
recharge with
the
AC charger:
1.
Disconnect any
12
V DC appliance and tum the light
switch to
OFF.
2.
Tum the AC outlet ON/OFF switch to OFF.
3.
Plug the AC charger into a standard AC wall outlet.
975-0339-01-01
27

Other manuals for Duracell POWERPACK 600

Related product manuals