Safety
&.
WARNING:
Heated surface
Ensure at least
2"
(5 cm) air space is maintained on all sides
of
the
Duracell® Powerpack. During operation, keep away from materials
that may be affected by high temperatures such
as
blankets, pillows
and sleeping bags.
&.
WARNING:
Fire
hazard
Never allow jump-start cables' red and black clamps to touch each
other or another common metal conductor. This could cause damage
to the unit and/or create a sparking/explosion hazard. Always
disconnect the jump-start cables from the unit after use and clip the
plastic guard over the jump-start cable port.
&.
WARNING:
Fire hazard
Jump-start cable clamps must be connected positive to positive (red
clamp to battery
"+") and negative to negative (black clamp to
battery "_"). A reverse polarity connection (positive to negative) may
cause damage to the unit and/or create a sparking/explosion hazard.
&.
WARNING:
Fire
hazard
The jump-start feature is designed for short term operation
only-
less than 4 seconds. Operating the jump-start feature for more than 4
seconds may cause damage to the unit. Allow the Duracell®
Powerpack to cool down for at least 3 minutes after each jump-start.
WARNING:
Risk
of
explosion,
fire
or
burns
The battery terminals exposed at the jump-start cable port have
enough energy present to cause a spark, creating an explosion hazard,
or to cause bums
if
a metal object contacts both terminals. Always
clip the plastic guard over the port when not in use.
&.
CAUTION
Do not connect any AC appliance with the neutral conductor
connected to ground to the Duracell® Powerpack.
&.
CAUTION
Do not expose the Duracell® Powerpack to temperatures over
40°C
(104
OF).
IV
975-0339-01-01
To Next Page
Loading...
