DURAVANT Wulftec WCA-SMART - Wrapper Manual Page Controls

Page | 35
WRAPPER MANUAL PAGE
Controls Functions
Local Message Display
Displays the status of the machine component selected. This display will
appear if an interlock is present.
Carriage Manual Speed
Used to set the speed of the carriage, in Hz, in manual mode.
Carriage
Used for the carriage vertical movement. Use the multi-function switch on
the control panel to move the carriage.
Rotation
Used for the rotation horizontal movement. Use the multi-function switch
on the control panel to move the rotation.
Rotation Speed
Used to set the speed of the rotation, in rpm, in manual mode. All alarms
will be active when operating at 2 rpm or faster.
Actual RPM
Displays the actual RPM speed.
Outfeed Conveyor(s)
Used for the conveyor movement. Use the multi-function switch on the
control panel to move the desired conveyors.
Process Conveyo
r
Used for the conveyor movement. Use the multi-function switch on the
control panel to move the conveyor.
Infeed Conveyor(s)
Used for the conveyor movement. Use the multi-function switch on the
control panel to move the desired conveyors.