Page | 36
WRAPPER MANUAL PAGE (CONT’D)
Controls
Functions
Top Sheet
Used for the top sheet vertical movement. Use the multi-function switch
on the control panel to move the top sheet.
Top Sheet Roll
Used for the top sheet roll movement. Use the multi-function switch on the
control panel to rotate the top sheet roll.
Top Sheet Push Bar
Used for the push bar movement. Use the multi-function switch on the
control panel to open or close the push bar.
Top Sheet Knife
Used for the top sheet knife vertical movement. Use the multi-function
switch on the control panel to move the knife.
Cut Top Sheet
In manual mode, used to start a top sheet cut sequence.
To Next Page
Loading...
